Q: HOW MANY CUSTOMERS ARE SERVED?
A: Approximately 10,000 connections serving a population of about 34,000 people.
Q: HOW BIG OF AN AREA DOES THE DISTRICT SERVE?
A: Approximately 27 square miles. From Baker Flats, north of the Odabashian bridge, south and east towards
the City of Rock Island.
Q: WHEN IS MY BILL DUE?
A: All water bills are due 30 days from the bill date.
Q: IS MY METER READ FOR ACTUAL CONSUMPTION ALL YEAR ROUND?
A: Yes. The District finished changing all meters to radio-read. Now your actual water consumption is billed every billing cycle.
Q: CAN I PAY MY BILL WITH A CREDIT CARD OR DEBIT CARD?
A: Yes! We accept credit card payments in-person, by phone, and online. We accept Visa, Mastercard, and American Express. There is no extra charge for this service.
Q: CAN I HAVE MY BILL CHARGED DIRECTLY TO MY CREDIT CARD?
A: Unfortunately, not at this time.
Q: CAN I PAY A SET AMOUNT EACH MONTH AND SETTLE UP AT THE END OF THE YEAR?
A: Soon. Budget billing is coming. You can, however, always pay monthly instead of waiting for your bill to arrive.
Q: HOW MUCH WILL IT COST ME TO FILL MY POOL?
A: Probably not as much as you think. Let's say you have a 20,000 gallon pool. Excess water is charged out at $2.30 per extra 100 cubic feet (748 gallons). If you divide 20,000 gallons by 748 gallons you get 26.74 (2674 cubic feet of water). 26.74 x $2.30 is $61.50. This is your excess water cost. You still get your base water allotment for the billing period at the regular charge.
Q: WHY DO I HAVE EXCESS
A: The amount of water a household uses depends upon several different factors:
- Family Size
- Everyday Habits - (i.e. leaving water running while brushing teeth, washing dishes, number of loads of laundry, etc.)
- Irrigation Use
- Water Softener Recycling Excessively
- Toilet Recycling Excessively
- Possible Leak!
Most customers have a difficult time staying below the included base capacity of 600 cubic feet (4,488 gallons) per month. We have seen several homes with just two occupants not stay below this base capacity. The typical customer uses about 150 gallons of water per day. THIS DOES NOT INCLUDE OUTDOOR USES!
Q: HOW DO I KNOW IF I HAVE A WATER LEAK?
A: One indication that you may have a leak is a change in your water pressure (i.e. you notice that your water pressure is lower than normal.) Lower than normal water pressure can also be caused by a malfunctioning pressure reducing valve (PRV).
Q: HOW DO I LOCATE MY LEAK?
The first thing you need determine is if the leak is inside your home or outside your home. To determine if the leak is outside your home, turn off the main water valve to your home. This is the valve that shuts off all the water to the inside of your house, NOT your water meter. Locate your water meter and check the RED dial. If the dial is spinning and you have the water inside your home shut off at the valve, then your leak is in your service line (between your water meter and your shut off valve). If the RED dial is not spinning, turn your main shut off valve to your house water back on and check your meter again. If the RED dial is now spinning, the leak is inside your home. If the dial is still not spinning, you may have what is known as an intermittent leak (toilet, water softener, hot water tank; something that does not leak constantly, but recycles water intermittently. You may have to watch your meter for several minutes to see of this is the type of leak that you have.
If you have performed both of these tasks and the meter is not spinning, then most likely you don't have a leak. Your meter is reading actual consumption. Remember, during the Spring and Summer months, your water consumption normally increases due to several factors: washing your car, filling your pool, watering your yard/garden/plants, etc.
If you believe your consumption is due to a malfunctioning meter or other factor beyond your control, please call us and we will send out a crew to re-read your meter and be sure it is functioning properly.
Q: WHY IS MY WATER DIRTY/RUSTY/CLOUDY/MILKY?
A: The color of your water is normally constant. However, from time to time you may notice a change in the color of your water. Dirty or Rusty water may indicate that there is construction work being done in your area and ground shake has dislodged dirt or rust in the water mainline near where they are working and it has invaded your water supply. Usually, letting your water run for several minutes will clear your line and fix the problem. Other times, your water appears milky or cloudy. This is caused by an overabundance of air in your water line. This is usually caused by a meter change-out which has left a bit of air in your line. Again, just run your water for a few minutes and the problem should clear up.
Are you experiencing:
1. Dirty or discolored Water?
2. Water that has a funny taste or odor?
3. Stains in your toilet bowl or bathtub?